Halcro DM78 Owner'S Manual Download Page 28

27 

 

Transferability 

Transferability means that the warranty stays 
with the product from the date of original 
purchase through the full warranty period, 
regardless of who owns the product. 

The Halcro warranty is transferable, providing 
that the original sales receipt or proof of 
purchase is supplied to both subsequent 
owners and to Halcro when ownership 
changes.  

Warranty verification 

It is the owner's responsibility to show proof or 
purchase verifying that the unit to be serviced 
is within the warranty period. Proof of 
purchase options include: 

 

copy of sales receipt showing name of 
original owner, dealer, and purchase date 

 

copy of credit card voucher or cancelled 
check accompanied by owner's record of 
purchase date and serial number 

Warranty registration 

While not required for service, we request that 
you register your Halcro product as soon as 
you purchase it. Please use the Halcro 
Product Warranty Registration form provided, 
or request a copy from your Halcro dealer. 

If service is required 

We suggest that you work with your 
authorized Halcro dealer when the need for 
technical service, training, or applications 
advice arises.  

To qualify for free warranty service, the 
following conditions must be met: 

 

the unit must be returned to Halcro or its 
authorized repair center in the original 
packing materials 

This will ensure the safety of the 
equipment. If you have misplaced or 
damaged the original packaging, you can 
purchase new packaging through your 
dealer or directly from Halcro. 

 

the unit must be accompanied by a copy 
of the Halcro Product Warranty 
Registration card and the original sales 
receipt 

 

shipments to Halcro must include a 
Return Authorization number 

To obtain this authorization, please ask 
your dealer or E-mail Halcro directly  

 

Halcro cannot be responsible for any 
damage caused to your equipment 
during shipping due to improper 
packaging 

 

if the packaging material needs to be 
replaced on its arrival at the factory, the 
owner will be informed of the 
replacement cost 

Summary of Contents for DM78































Reviews: