background image

                                                                 

                 

                   

 

Page 21 of 24 

 

V2.0 

 

III. Warranty 

 

Hal Technology provides a one-year limited warranty of the Model HFX205 Handheld 

formaldehyde meter, but not including necessary calibration service.   

 

Warranty begins from shipping date. 

 

The user is responsible for the cost of shipping in the case of any service or repair 

needed. 

 

The warrantee only limits to the HFX205 and HAL TECHNOLOGY does not extend 

this liability to accessories and any other equipment damage, body injury and loss 

of properties due to abnormal use. 

The following are not included in the warranty:   

 

Improper connection to a power source, resulting in damage of the instrument.

 

 

Any physical damage due to mechanical forces (e.g., collision or dropping) that may 

cause any damage of the front panel, LCD screen, switch and internal components, 

etc.

 

 

Unauthorized opening of the instrument.

 

 

Damage due to operation in an un-specified environmental condition.

 

 

Abnormal operation due to instrument needing calibration.

 

 

Limitation of Warranty 

A. Hal Technology warrants that all equipment shall be free from defects in material and 

workmanship  under  normal  use  for  a  period  of  one  year  from  date  of  shipment  to  Buyer 

except that Hal Technology does not warrant that operation of the software will be completely 

uninterrupted  or  error  free  or  that  all  program  errors  will  be  corrected.  Buyer  shall  be 

responsible for determining that the equipment is suitable for Buyer’s use and that such use 

complies with any  applicable local,  state,  or federal  law.  Provided that  Buyer  notifies Hal 

Technology in writing of any claimed defect in the equipment immediately upon discovery 

and any such equipment is returned to the original shipping point, transportation charges 

prepaid,  within  one  year  from  date  of  shipment  to  Buyer  and  upon  examination  Hal 

Summary of Contents for HFX205

























Reviews: