HAKO Scrubmaster B310 R/TB 1020, Instruction Manual, Page: 29 / 100

29
Operation
If other batteries are used, the
total discharge signal trans-
ducer must be adjusted. This
adjustment work should only
be performed at an authorized
Hako service center.
The trough battery is provided with a
connection cable with battery plug
(Fig. 13/5). When the battery plug is
plugged into the vehicle socket
(Fig. 13/6), the vehicle is ready to oper-
ate. To charge the trough battery, insert
the battery plug in the charger. The ve-
hicle includes a battery charger provid-
ing
• 36 Volt/60 ampere
• IUIa characteristic curve
• 230 V power supply line
Pay attention to the safety information
titled "Information on driving batteries",
supplementary sheet 88-60-2556, en-
closed with each battery.