HAKO Scrubmaster B175 R, Operating Manual

Page: 11 / 102

01-7180-00.fm
11
Safety instructions
• Drive slowly on wet surfaces, particularly in bends, due to the risk of
skidding.
• Drive slowly into the bend when driving downhill.
• For cleaning, the machine must only be used on a level surface with a
maximum slope of 6 %.
• Transport journeys on slopes of up to 10 % must only take place for a
limited period of time and with special caution.
• Manipulating the switches and protective devices is forbidden.
After operation
• Remove the key when leaving the machine to prevent unauthorised use.
• After use, park the machine in a dry, indoor location with the brush head
and squeegee raised.
1.4 Maintenance instructions
• Daily and weekly maintenance work must be done in accordance with the
maintenance plan by the operating staff. In all other maintenance work,
please contact your nearest Hako service centre.
• The maintenance work and maintenance intervals specified in the
operating manual must be complied with.
• Suitable tools and protective clothing such as gloves and safety goggles must
be used during cleaning and maintenance work.
• Have the machine checked for safe condition by an expert in accordance
with the accident prevention regulations at appropriate intervals (we
recommend at least once yearly).
• Spare parts must at least comply with the technical requirements specified
by the manufacturer. This is guaranteed by original spare parts.
• Turn the machine off and disconnect the battery connector when cleaning
and maintaining the machine and before replacing parts.
• To prevent unauthorised use of the machine, remove the ignition key.
• Cleaning the machine with a high-pressure cleaner or steam jet is not
allowed.
• Application of aggressive and corrosive detergents is not allowed.
• After cleaning, let the machine air dry, e.g. over the weekend.
• Only put the machine into service when all the protective devices are
attached and in protection position.