84
05-7177-00.fm
Maintenance and Servicing
Height adjustment
The height adjustment (X) of the supporting rollers
Fig. 48-A
has been set to
3 mm in the factory. If striping still occurs despite optimum inclination
adjustment, set the distance of the supporting rollers to the lower edge of the
sealing strip by adjusting the number of washers under the supporting roller
holder.
Number of washers /
distance to the
ground (X)
Use
1/2 mm
Very smooth floor surfaces, e.g. coated screed,
PVC, linoleum
2/3 mm
Standard setting
3/4 mm
Very uneven floor surfaces, e.g. poorly laid tiles
(water does not drain off)
Fig. 48:
A
X
2 mm
3 mm
4 mm
