Armadillo 6X and AM7D-III PB# 4100043UM Rev. B 07/20
PowerBoss®, Copyright 2014
Page 69
PowerBoss
®
The Power of Clean
4. Raise the hopper and engage the safety arm.
5. Locate both the cable clevis ends for the brake
cables.
6. Disconnect the clevis ends from the bar.
7. Loosen the jam nuts at the base of the clevis.
8. Turn the clevis clockwise three or four complete
turns.
9. Tighten the jam nuts and re-install the clevis
ends onto the bar.
10. Repeat steps 5 through 9 for the opposite side
brake.
11. Adjust the knurled handle on the parking brake
lever.
TIRES
Changing Solid Tires
NOTE: The procedures which follow apply to
SOLID TIRES ONLY.
1. Remove the tire from the vehicle by removing
the fi ve inner lug nuts.
2. Remove the ten hex head bolts and nuts.
3. Press the tire from the rim.
4. Press the large rim half into the new tire.
5. Mount the small rim half and secure with hex
head bolts.
6. Reinstall the tire on the machine
BRAKE CABLE
CLEVIS END
JAM NUT