Citytrac 4200
Citymaster 1200
Citycleaner
Service Documents
For internal use only
Status
March 2009
Page
31 of 108
5.1 Safety regulations
•
The hydraulic system is under high pressure!
High-pressure fluids (fuel, hydraulic oil) escaping at high pressure can penetrate the skin and cause severe injuries. Therefore,
seek medical attention immediately to prevent the possibility of developing a severe infection!
•
Use the applicable tools when searching for leaks to prevent the risk of injury!
•
Before starting work on the hydraulic system, it must be depressurised and any devices attached must be lowered!
•
When working on the hydraulic system, it is essential to switch the engine off and secure the vehicle against rolling away
(parking brake, wheel chock)!
•
When connecting hydraulic cylinders and motors, pay strict attention to the method of connecting hydraulic hoses prescribed!
•
If connections are swapped, there is a risk of reversed functioning (e.g. raise/lower) - risk of accident!
•
Check hydraulic lines at regular intervals and replace them in the event of signs of damage or ageing!
The replacement hoses must fulfil the technical requirements stipulated by the equipment manufacturer!
Dispose of oils, fuel and filters according to the applicable laws!
