5
Warning system
1.3.2
Setting in the configuration
menu
Requirements:
• Batteries inserted
• Diagnosis plug 97097737 available
Preparation:
1. Place the machine on a level surface
and hold it with the parking brake.
2. Open the seat console.
3. Remove the bolts of the cover.
4. Carefully remove the cover from the
front ensuring the plug of the on-
board charger is not pulled out.
5. Connect the diagnosis plug
97097737 to plug A1.X3 (Fig. 2/2) of
the control electronics A1.
Setting:
1. Open the configuration menu:
Press button 1 and button 2 simulta-
neously and switch on the key switch
(Fig. 2/3) and hold it for 3 seconds.
The right-hand dot flashes in the in-
dicator (Fig. 2/4):
2. Press button 2 twice. The chapter is
now set to 1. The dot next to 1 flash-
es:
3. Press button 1 twice. The dot to the
right of the content 0 flashes:
4. Press button 2 once. The content
changes to 1 (forwards drive warning
system). The dot to the left of the
content 1 extinguishes:
5. Press and hold button 3 for
3 seconds to save the setting. The
dot to the left of the content appears.
6. Remove the diagnosis plug from the
control electronics and reattach the
cover.
