background image

2

Foreword

The installation procedures described 
in this assembly manual may only be 
undertaken by a Hako service centre or 
a workshop authorised by Hako. Mem-
bers of staff with the required level of 
training and expertise are only guaran-
teed in the said workshops.
This assembly manual may be used 
only in conjunction with the instruction 
manual of the machine.

Safety instructions

Please observe the general safety 
regulations of the corresponding ma-
chine in the relevant operating manual. 
Place the machine on a level surface 
and secure it with the parking brake. 
Switch the machine off and pull out the 
key.

We would expressly advise you that no 
legal claims may be asserted based on 
the contents of this manual. In the case 
of necessary repair work, please make 
sure that only original spare parts are 
used. Only original spare parts guaran-
tee constant and reliable operational 
readiness of your machine. We reserve 
the right to make changes in the inter-
ests of further technical development.

Valid as from: June 2017

Hako GmbH
23843 Bad Oldesloe, Germany
Hamburger Str. 209-239
Phone +49 4531 806-0

Introduction

Summary of Contents for 7091.55







Reviews: