4
LED working light
1.3
Installing the working light
The working light is installed on the left
next to the front wheel (Fig. 2/1).
1. Screw flanged button head bolt
M5x12 (Torx) with working light into
existing hole (Fig. 2/2).
2. Insert corrugated hose holder into
3. Secure cable of working light to
corrugated hose holder in such a
way that it is free of tension.
4. Lead cable through floor opening
into the electronics area (Fig. 2/4).
5. Connect plug of working light
(Fig. 2/5) to 2-pin connector E01 of
cable loom W 2 (Fig. 2/6).
1.4
Adjusting the working light
Align working light so that it is
straight-ahead in the direction of travel.
Adjust tilt in accordance with required
floor illumination.
Fig. 2
4
1
2
3
5
6
