8
High-pressure cleaner
2.2
Assembling the high-pres-
sure cleaner
Danger!
Hydraulic pipes must be correctly run
and fitted! The work may be done only
by authorised trained personnel! Make
sure that no connections are swapped
over! Fitting, length and quality, espe-
cially pressure and temperature resist-
ance, of hydraulic pipes must comply
with the requirements! Always relieve
the hydraulic pipes of pressure in as-
sembly work.
2.2.1
Preparations
1. Place the machine on a level surface
and secure it with the parking brake
(Fig. 2/1).
2. Switch off the engine and remove
the ignition key (Fig. 2/2).
3. Open the rear flap (Fig. 2/2) with the
square key and swing it up.
Fig.2
1
2