Page 6
Safety and Maintenance Checks
Cloth Bag Filter
After every use
Remove Cloth Filter Bag and empty.
Occasionally
Turn bag inside out and remove fine dust coating using a soft
banister brush or vacuum.
Note:
The filter material has been treated with a moisture re-
pelling agent for improved dust release. There is no requirement
for washing or dry cleaning the Filter Bag.
XP & XP +PLUS H10 HEPA Filter
After every use
Remove VFD Filter and tap out dust.
Occasionally
Brush surface using a soft nylon brush or wash filter in neutral
cleaner solution then rinse in clean water.
Note:
Ensure filter is completely dry before
XP HEPA & XP HEPA +PLUS- H14 HEPA Filter
(where fitted)
Check after every use
Remove HEPA filter if necessary and tap out dust.
Occasionally
Wash in neutral cleaner solution using swirling action only, then rinse
in clean water.
Note:
The filter material has been treated with a soft polymer
moisture repelling agent, do not touch media surface by hand or any
other mechanical device as this can damage the media and impair the
filtration quality. Ensure filter is completely dry before recommencing
vacuuming.
As Needed
Check Inlet Elbow, Hose, Bent End Piece and Floor Tool for blockages.
Regularly
Check cord for cuts, exposed wire, abrasion and twisting.
Replace cord only with original manufacturer
’
s part.
Note:
Always unplug cord from power point when not in use.
Gather the cord by winding from the machine end.
Drape cord over handle for storage.
-
Rocket Vac XP +PLUS - Rocket Vac XP HEPA +PLUS - Rocket Vac XP - Rocket Vac XP HEPA
H10 HEPA
H14 HEPA
