Page 4
Machine Assembly
To Remove - H10 HEPA Filter from XP or XP +PLUS
Use the Panel Filter flaps to lift from canister base. Remove
with care from the canister.
To Fit - H10 HEPA Filter into XP or XP +PLUS
Insert into canister base filter recess. Press firmly around the
edge of the filter to fit into position.
NOTE:
Do not press on filter media.
Cord –
To Fit
For safety in reducing tripping
hazards, and for unplugging, Fit the
cord onto extension cord restraints
on both sides of machine as shown.
Air Regulator –
To Adjust
Slide forward to close, this provides more air at the nozzle.
Slide back for less air, this is to be used when vacuuming
loose materials eg. curtains.
Attachments –
To Fit or Remove.
Twist and pull to disassemble. Attach at any point from Bent
End Piece to Wand end, to suit application.
Aus/NZ model - switch side
Rocket Vac XP +PLUS - Rocket Vac XP HEPA +PLUS - Rocket Vac XP - Rocket Vac XP HEPA
Aus/NZ model- power inlet side
