1
PACKAGING
The G-Force and G-Force Hi-Torque models
are despatched in two cartons. The cartons
contain the handle and chassis assembly.
HANDLE ASSEMBLY
Rem
ove the 5” bolt from the handle support
lugs.
Fit the handle between the chassis lugs. Insert
bolt with washer under bolt head through lugs
and handle stem. Tighten nut with washer
under nut head until no side movement is
evident and handle is free to rotate.
Remove 3” bolt from handle upright support
lugs and repeat the above procedure.
ELECTRICAL CONNECTION
Align 4 pin bayonet socket from handle with
plug base on chassis, and lock into place, refer
to Pic.2.
HANDLE ADJUSTMENT
To adjust handle height, release the handle
clamp by rotating the handle lever shown in Pic
3 clockwise, adjust handle to comfortable waist
height, then lock into position, by rotating the
lever counter clockwise.
Do not use excessive force to lock.
Do not adjust the back of the handle clamp
shown in Pic 4.
Lugs
3” Bolt
Pic 1 G-Force & G-force Hi-Torque Handle Assy
Pic 2 Electrical Connection
Pic 4 Factory Connection
User Adjustment Not
Required On This Joint
Handle
Upright
5” Bolt
Clamping
Direction
Release
Direction
Pic 3 Handle Adjustment
