Haklift Oy
Asessorinkatu 3-7
20780 Kaarina, Finland
Tel. +358 2 511 5511
www.haklift.com
Lifting Solutions Group
Axel Johnson International
4. Operation, maintenance and charging of the battery
4.1 Battery type and safety precautions
4.1.1 Battery type: Lithium battery; battery voltage 48V; environmental protection battery, no Hg
and Cd etc.
4.1.2 Precautions:
a) Ambient temperature for the battery is -10 ~ 45ºC.
b) Charge every 3 months during a long time battery storage.
c) Before using a new battery or if it has been stored for long periods of time, fully charge the
battery before use.
d) Do not short circuit the battery, which may permanently damage the battery.
e) Do not burn or destroy the battery, which may cause toxic gases to release or explode.
f) Do not weld the battery directly.
g) Do not expose the battery to an unfavorable environment, such as extreme temperature, deep
cycle, or often overcharge / over discharge.
h) If the battery is hot, do not touch it until it has cooled down.
i) When removing the battery, grasp the plug by hand instead of stay wire.
j) After the battery is used, if the battery is hot and recharging it, cool it down in a ventilated
environment.
k) Do not put the battery in water or seawater.
l) Do not try to separate, squeeze or hit the battery, the battery will heat or fire. Batteries lye is
harmful to the skin and eyes, and will damage the clothes.
m) Keep the battery away from children and contact the doctor immediately if it is found to be
swallowed.
4.2 Quick replacement of the battery
Step 1: Turn off the electric switch.
Step 2: Pull the puller of the battery connector, unplug the battery connector. (Note: Operator must
hold the puller when unplugging the battery connector, not allowed to unplug the wire directly.)
