Hakko Electronics Monitouch V7, Hardware Specifications

Page: 51 / 128

3-2 2. Power Supply Cable Connection
2. Power Supply Cable Connection
Power Supply Cable Connection
•
Connect the power supply cable to the terminal on the backside of the unit.
- V708/V708i - V710/V710i/V712/V712i
•
When connecting the power supply cable, tighten the terminal screws to the following torque.
•
The power source must be within the allowable voltage fluctuation.
•
Use a power source with low noise between the cables or between the ground and the cable.
•
Use as thick a power supply cable as possible to minimize drop in voltage.
•
Keep cables of 100 VAC and 24 VDC sufficiently away from high-voltage, large-current carrying
cables.
DANGER
Electric shock hazard
Shut the power off before connecting the power supply cable.
24 VDC
24VDC
- +
LAN
CN1
MJ1
MJ2
PRINTER
CF
CN5 MEMORY
CN6
L N
24VDC
100-240VAC
L N
LAN CN1 MJ1 MJ2 PRINTER
CF
CN5
MEMORY
CN6
See operating or maintenance
instruction for type of battery
to be used.
Battery replacement.
Power supply
24 VDC
±
10%
Grounding
24 VDC specification
100-240 VAC specification
Power supply
100-240 VAC
Grounding
Power supply
24 VDC
±
10%
Grounding
24 VDC specification
Model
Terminal Screw
Screw Size
Tightening
Torque
Crimp-style Terminal (Unit: mm)
V708/V708i M3.5 0.5 N•m
V710/V710i/V712/V712i M4 0.5 N•m
7.1 MAX 7.1 MAX
7.9 MAX 7.0 MAX