Hakko Electronics FR-702, Instruction Manual, Page: 3 / 72

2
2. SPECIFICATIONS
焊鐵部
連接部
隔離器
電路板
插頭
插座
電磁蓋
真空泵組件
螺釘
動力單元
×
×
×
×
×
×
×
×
×
× ○
○
○
○
○
○
○
○
○
○ ○
○
○
○
○
○
○
○
○
○ ○
○
○
○
○
○
○
○
○
○ ○
○
○
○
○
○
○
○
○
○ ○
○
○
○
○
○
○
○
○
○
●
HAKKO FR-4101
Power consumption
Nozzle to ground resistance
Nozzle to ground potential
Cord
Length (w/o cord)
Weight (w/o cord) 140W (24 V)
< 2 Ω
< 2 mV
1.2 m (3.9 ft.)
168 mm with N61-05 nozzle
170 g with N61-05 nozzle
65W (26V)
< 2
Ω
< 2 mV
Ceramic heater
1.2 m (3.9 ft.)
217 mm (8.5 in.) with B tip
46 g (0.10 lb.) with B tip
* The temperature was measured using the FG-101 thermometer.
* This product is protected against electrostatic discharge.
* Specifications and design are subject to change without notice.
●
HAKKO FX-8801
Power consumption
Tip to ground resistance
Tip to ground potential
Heating element
Cord
Total length (w/o cord)
Weight (w/o cord)
●
Station (Soldering iron)
Output
Temperature range
Temperature stability AC26V
50 - 480
℃ (120 - 899 ℉ )
±1 ℃ at idle temperature
{When set to 200-480℃ (400-899℉)}
●
Station (Desoldering tool)
Output
Vacuum generator
Vacuum pressure (max.)
Suction flow
Temperature range
Temperature stability AC24V
Vacuum pump, double cylinder type
80 kPa (600 mmHg)
15 L/min.
330 - 450℃ (620 - 850℉)
±5℃ (9℉)
at idle temperature
●
Station
Dimensions (W × H × D)
Weight (w/o cord)
370(W) × 150(H) × 220(D) mm
(14.6 × 5.9 × 8.7 in.)
9 kg (19.8 lb.)
■
Electrostatic Protection
This product includes such features as electrically conductive plastic parts and grounding of the unit
as measures to protect the device to be soldered from the effects of static electricity. Be sure to observe
the following instructions:
1. The plastic parts are not insulators, they are conductors. When making repairs or replacing parts,
take sufficient care not to expose live electrical parts or damage insulation materials.
2. Be sure to ground the unit during use.
●
Station (SMD Rework station)
Power consumption
Capacity (Airflow)
Control temperature
30 W
1 - 9 (5 - 115L/min*)
50 - 600℃ (120 - 1120℉
* Airflow capacity is rated as free flowing. Restrictions created by
various nozzles may reduce the maximum airflow capacity.
●
Handpiece (SMD Rework station)
Power consumption
Total length (w/o cord)
Weight (w/o cord)
100V-670W 110V-810W
220V-1070W 230V-1170W 240V-1270W
250 mm (9.8 in.)
180 g (0.40 lb.)
Power consumption 100V-1030W 110V-1170W
220V-1430W 230V-1530W 240V-1630W