Hakko Electronics FP-948, Instruction Manual

Page: 47 / 68

46
日
本語
中 文
English
3. WARNINGS, CAUTIONS AND NOTES
WARNING
Warnings, cautions and notes are placed at critical points in this manual to direct the opera-
torʼs attention to significant items. They are defined as follows:
WARNING: Failure to comply with a WARNING may result in serious injury
or death.
CAUTION : Failure to comply with a CAUTION may result in injury to the
operator, or damage to the items involved. Two examples are
given below.
NOTE : A NOTE indicates a procedure or point that is important to the
process being described.
CAUTION
When power is ON, tip temperatures will be between 200 and 450°C. (392 to 840°F.) To avoid
injury or damage to personnel and items in the work area, observe the following:
●
Do not touch the tip or the metal parts near the tip.
●
Do not allow the tip to come close to, or touch, flammable materials.
●
Inform others in the area that the unit is hot and should not be touched.
●
Turn the power off when not in use, or left unattended.
●
Turn the power off when changing parts or storing the MODEL FP-948.
To prevent accidents or damage to the MODEL FP-948, be sure to observe the following:
●
Do not use the MODEL FP-948 for applications other than soldering.
●
Do not allow the MODEL FP-948 to become wet, or use it when hands are wet.
●
Do not modify the MODEL FP-948.
●
Use only genuine HAKKO replacement parts.
●
Do not bend or damage the control card. If the card does become damaged, do not force
the card into the station slot.
●
Do not strike the iron against hard objects to remove excess solder. This will damage the
iron.
●
Be sure the work area is well ventilated. Soldering produces smoke.
●
While using MODEL FP-948, donʼt do anything which may cause bodily harm or physical
damage.