1
SOLDERING STATION
FX-961
1. PACKING LIST
HAKKO FN-1010 soldering station .................................1
Soldering iron (FN1101-81) ............................................1
Power cord .....................................................................1
Iron holder ......................................................................1
Tip cleaner (FT401-81) ...................................................1
Cleaning wire (A1561) ....................................................1
Instruction manual ..........................................................1
Please check to make sure that all items listed below are included in the package.
HAKKO FN-1010
soldering station
Power cord
Instruction manual
Tip
(not included)
Tip cleaner
(FT401-81)
Cleaning wire
(A1561)
Soldering iron
(FN1101-81)
Iron holder
(FH210-81)
2. SPECIFICATIONS
Power consumption
100W
50 – 450℃ (120 – 840℉)
Temperature stability
±3℃ (±5℉)
at idle temperature
Station
Output
21V
Dimensions
104 (W) ×1 38 (H) × 152 (D) mm
Weight
1.9 kg
*1 The temperature was measured using the HAKKO FG-101
thermometer.
HAKKO FN-1101 (soldering iron)
Power consumption
95W (21V)
Tip to ground resistance
<2Ω
Tip to ground potential
<2mV
Length of cord
1.2 m
Length (w/o cord)
180 mm (with 2.4D tip)
Weight (w/o cord)
32 g (with 2.4D tip)
• This product is protected against electrostatic discharge.
• Specifications and design are subject to change without notice.
CAUTION
This product includes such features as electrically conductive plastic parts and grounding of the handpiece and
station as measures to protect the device to be soldered from the effects of static electricity. Be sure to observe
the following instructions:
1. The handle and other plastic parts are not insulators, they are conductors. When replacing parts or repairing,
take sufficient care not to expose live electrical parts or damage insulation materials.
2. Be sure to ground the unit during use.
