![background image](http://html1.mh-extra.com/html/hakko-electronics/fm-204/fm-204_instruction-manual_3319041006.webp)
5
Not sensitive to vertical orientation
●
Attaching and replacing the nozzle cartridge
Insert the nozzle cartridge fully into the grip
as shown in the illustration. Once the nozzle
cartridge is inserted, it is locked automatically.
CAUTION
The nozzle can be very hot. To attach or remove the
nozzle cartridge, be sure to use the nozzle remover to
preclude the possibility of breaking the grip or cartridge.
To replace the nozzle cartridge, insert the nozzle
remover into the fl ange of the nozzle cartridge,
press the nozzle unlock button
A
and remove
the nozzle cartridge.
CAUTION
The nozzle may be very hot.
The nozzle remover may be left mounted on
the end of the straight grip when not in use to
prevent it from being misplaced.
●
Using the desoldering iron in the gun
confi guration.
To use the desoldering iron in the gun
confi guration, attach the handle to the straight
grip.
●
Using the desoldering iron in the pen
confi guration.
To remove the handle, slide down the button
located on the rear of the handle to unlock it,
then slide the handle toward the back of the
MODEL FM-2024.
Inserting the tip:
●
Holding the front end of the tip, insert it into
the sleeve assembly.
CAUTION
Insert the tip into the sleeve assembly until it clicks into
place. When you hear it clicks, avoid forcing the tip into the
sleeve assembly.
●
Insert the tip securely into the connector.
NOTE:
Improper insertion of the tip will cause
to appear
on the display.
Push
Nozzle remover
Align the parts and slide the handle
toward the front.
The handle will be locked
automatically.
1
2
Hold this part to insert the tip into the sleeve assembly.
Hold this part to insert the tip into the connector.
CAUTION
When holding the head of the tip, there is a danger of burn.
Be sure to use the heat-resistant pad.