Hakko Electronics FM-2024, Instruction Manual

Page: 18 / 20

FM-2024
24V
-70W
6
3
2
1
5
2
1
3
8
7
9
4
10
17
8. PARTS LIST
Desolder control box
Item No. Part No. Part Name Speci fi cations
1
C1492 Desolder control box/120V With power cord, 3 wired cord & American plug
C1528 Desolder control box/230V With power cord, 3 wired cord & European plug CE
C1529 Desolder control box/230V With power cord, 3 wired cord & BS plug CE
2
3
Desoldering tool
Item No. Part No. Part Name Speci fi cations
FM2024-21 Conversion kit/120V DCB: C1492
FM2024-33 Conversion kit/230V DCB: C1528
FM2024-34 Conversion kit/230V DCB: C1528
FM2024-35 Conversion kit/230V DCB: C1529
1 - 6 , 8
1
2
3
4
5
6
7
8
9
10
2
3. WARNINGS, CAUTIONS AND NOTES
WARNING
In this instruction manual, “WARNING” and “CAUTION” are defined as follows.
WARNING: Misuse may potentially cause death of, or serious injury to the
user.
CAUTION : Misuse may potentially cause injury to the user or physical
damage to the objects involved.
For your safety, be sure to comply with these precautions.
Failure to do so may result in serious problems.
CAUTION
When the power is on, the nozzle temperature is between 350°C/650°F and 450°C/840°F.
Since mishandling may lead to burns or fire, be sure to comply with the following
precautions.







To prevent damage to the unit and ensure a safe working environment, be sure to comply
with the following precautions.
Use only filtered air. Adjust the pressure to 490 to 686 kPa (5.0 to 7.0 kgf/cm
2
) while
allowing air to flow by pulling the trigger.

Do not use the unit for applications other than desoldering.

Do not rap the desoldering tool against the work bench to shake off residual solder, or
otherwise subject the iron to severe shocks.

Do not modify the unit.

Use only genuine HAKKO replacement parts.

Do not wet the unit or use the unit when your hands are wet.

When desoldering, ensure good ventilation for smoke.

While using the unit, don ’ t do anything which may cause bodily harm or physical
damage.
Do not touch the metal parts near the nozzle, nearby plastic parts, or the spring iron holder.
Do not use the product near flammable items.
Advise other people in the work area that the unit can reach a very high temperature and
should be considered potentially dangerous.
Turn the power off while taking breaks and when finished using the unit.
Before replacing parts or storing the unit, turn the power off and allow the unit to cool to
room temperature.
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
Children should be supervised to ensure that they do not play with the appliance.
A1613
B2880
B2068
B3053
B3054
B3505 Ceramic paper fi lter
Vacuum outlet cap
Power cord, 3 wired cord & American plug
Power cord, 3 wired cord & European plug
Power cord, 3 wired cord & BS plug
Power cord, 3 wired cord & American plug
Set of 10
W/o-ring
For U.S.A.
CE, KTL
CE
FM2024-02
A1612
A1512
A1513
B2872
B2873
B2876
B2877
B2878
B2879
B3253
Desoldering tool
Filter pipe assembly
Front holder
Back holder bushing
Handle
Cleaning drill
Nozzle remover
Hose
Back holder
Flange
Connecting cable 24V, 70W
Set of 10
For gun configuration
For heating element