7
"MAX HOLD"
disappears
indicating the
function is
cancelled.
MAX HOLD
MAX HOLD
MAX HOLD
Press the
button for
1 second or more
Max. temperature is updated.
Press the
less than 1 second
button for
Press the
less than 1 second
button for
MAX HOLD
■
MAX HOLD function (Temperature
measurement only)
Quickly pressing the
button will cause "
MAX
HOLD
" to be displayed at the bottom of the
screen. As long as "
MAX HOLD
" is shown, the
maximum temperature will stay displayed.
Operation method
•
Pressed quickly (less than one second)
"
MAX HOLD
" is displayed at the bottom
of the screen.
•
Pressed quickly (less than one second)
(
"
MAX HOLD
"
is displayed )
By pressing the button quickly, the
displayed value will be reset and the
maximum temperature after pressing the
button will be displayed.
•
Pressed for a long time (1 second or
longer)
The MAX HOLD function will be released
and the product will return to normal
display.
CAUTION
・
Turning off the power always cancels the
MAX HOLD function.
・
The MAX HOLD function can only be used
during the temperature measurement.
HAKKO FG-101B can use the following functions.
4-4 Measurement of resistance difference between tip and ground wire
4-5 Explanation about various functions
1)
Plug the power plug of the soldering iron to be measured into the power receptacle the
HAKKO FG-101B main body.
2)
Wait until the tip reaches the set temperature. If the soldering iron temperature is variable,
set temperature to maximum.
3)
Press the SELECT button and change the mode to "
OHM
".
4)
Press the
button. {Refer to "
■
AUTO ZERO function
" (page 8) in "
4-5 Explanation
about various functions
".}
5)
Perform the measurement in the same procedure as "
4-3 Measurement of leak voltage
".
