4
B. Preparation on the soldering iron side
Stick the barcode that comes with the equipment or a printed one to the soldering iron station or
the iron. When sticking the barcode to a unit, be careful of the following points.
CAUTION
・
Select a flat surface and avoid any curved surface wherever possible when sticking
the barcode seal.
・
The barcode itself should be 2.5 mm wide or over.
・
There should be a margin of 2 mm or over on both ends of the barcode, as shown on the figure.
・
Do not use metallic luster for the background when making a barcode seal.
・
Do not cover the barcode with lustrous or reflective tape or anything like that.
Barcode
reader connector
●
Connect barcode reader
Connect barcode reader to the D-subminiature and fix the screws.
Connecting barcode reader
The bar code pasted Example
for FG102
*******
for FG102
*******
2mm
