17
■
Checking the saved data
By pressing the button after recording the temperature or immediately after the transition to the
recording mode, you can view the measurement data recorded previously.
・
The data may be scrolled by pressing the or button.
・
Reading the unit ID causes the return to the recording operation.
Unit ID
00001
Gp
xx
Meas ID 00001
Temp
421℃
Date
04/17/15:10
Meas ID 00001
Temp
415℃
C. Unit record MODE
In the recording mode, pressing the button before reading the unit ID or after the temperature
recording causes the transition to the Unit record mode. In this mode, you can view data for a
particular unit ID out of the recorded data.
1. The unit ID selection screen will show up.
2. Using the or button, select a number for each digit of an ID.
3. Press the button to determine the number.
Repeat the above steps for 5 digits to determine the ID, or read the barcode of ID for the data you would
like to see and determine it by pressing the button. And the data for the ID will be displayed.
※Pressing the button on the data display screen will bring you back to the ID selection screen.
Unit data display screen
Unit record
U n i t I D : * * * * * *
Unit ID selection screen
