background image

3

3.  WARNINGS, CAUTIONS AND NOTES

In this manual, items requiring caution are classified into 2 categories, 

"

WARNINGS

"

 and 

"

CAUTIONS

"

, as defined below. Please make sure to understand these items before reading 

the main text.

 

WARNING : 

Failure to comply with a WARNING may result in serious injury or death.

 CAUTION

 : 

 

Failure to comply with a CAUTION may result in injury to the operator, or damage 
to the objects involved.

 

NOTE

 : 

Indicates important steps or items in the procedure being explained.

Be sure to observe the following warning items.

 

WARNING

 

The unit is for a counter or workbench use only. 

 

This appliance can be used by children aged from 8 years and above and persons with reduced 
physical, sensory or mental capabilities or lack of experience and knowledge if they have been 
given supervision or instruction concerning use of the appliance in safe way and understand the 
hazards involved.

 

Children shall not play with the appliance.

 

Cleaning and user maintenance shall not be made by children without supervision.

Be sure to observe the following warning items, for which failure to do so may cause 
accidents or malfunctions.

 

CAUTION

 

This unit is for indoor use only. 

 

When using the thermometer to measure the temperature of the soldering iron tip or desoldering 
nozzle, pay great attention to the temperature of the tip or nozzle since it will be as high as 200 to 
450°C (392 to 842°F). Careless handling of such a hot object may result in a burn or fire.

 

Do not modify this product.

 

Do not get this product wet or use it with wet hands.

 

Be sure to unplug the power plug before internal inspection or replacement of parts. Failure to do so 
may cause an electric shock.

 

Use HAKKO genuine parts as replacement parts.

 

When inserting or unplugging the power plug, do so while holding the plug, not the cord.

 

Do not perform dangerous actions.

Summary of Contents for FG-101B













Reviews: