●
Factory setting
The Hakko 472D comes from the factory with
the following values preset:
Temperature scale
Low temperature alarm setting
Set temperature
°
F
120
750
●
Control card
Each Hakko 472D comes with a small card, which
inserts in the control slot in the front of the unit.
This card is used when entering data for the
process control functions. Any Hakko 472D card
can be used with any Hakko 472D soldering
station.
Using the control card
The control card is used when a value is to be
changed or data are to be entered. The Hakko
472D will operate normally with the card inserted.
Remove the control card to lock the data.
●
Setting/Changing the
temperature
1. Insert the card into the card slot in the
front panel of the station.
• The HUNDREDS digit in the display
begins to flash, indicating that the station
is in the temperature setting mode and
data can be entered.
2. Enter the HUNDREDS digit
• Use the
or
button to select the
desired value for the HUNDREDS digit.
For setting in degrees Celsius, either 3 or
4 can be selected. For settings in degrees
Fahrenheit, values between 6 and 8 can
be selected. When the desired value is
displayed, press the
button.
Press the button once.
Press the or button.
Insert the card.
UP
DOWN
Example :
Change the temperature from 700
°
F to 840
°
F
6