2. NOTES ON USAGE
2
CAUTION
For safety reasons, be sure to ground the unit by connecting the ground wire to a grounded terminal.
3. SPECIFICATIONS
Model No.
HAKKO 494
l
Station
Part Name
Station
Frequency
50 Hz
60 Hz
Power Consumption
150 W
200 W
Static Pressure
2.3 KPa (240 mmAq.) 3.2 KPa (325 mmAq.)
Absorption Capacity
1.56 m
3
/min.
1.82 m
3
/min.
Dimensions
(W x H x D)
322 x 300 x 386 mm
(12.68 x 11.81 x 15.2 in.)
w/o handle, cord
Weight
18 kg (39.9 lb.)
*Specifications and design are subject to change without notice.
l
Replacement Parts
Part No.
Name
Contents
C1028 Duct Set
Filter cap ...........................1
Pre-filter ............................5
Nylon strap .......................2
Filter strap.........................1
Duct/1.5 m (4.92 ft.) ..........1
Part No.
Name / Specification
Contents
C1029
Absorption pipe set A/
DASH, 900M/L
Absorption pipe ....................... 1
Silicone hose/1 m (3.28 ft.) ...... 1
Hose coupling band ................. 5
Metal fitting for absorption pipe ... 1
C1030
Absorption pipe set B/
DASH, MACH-I (920, 921, 922)
C1031
Absorption pipe set C/
MACH-I (918)
C1033
Absorption pipe set E/
MG30 W – 100 W
C1034
Absorption pipe set F/455
C1035
Absorption pipe set G/456
C1086
Absorption pipe set H/902, 904 H contains cap nut (1) and Wave
washer (1), additionally.
C1540
Absorption pipe set R
Absorption pipe ....................... 1
Silicone hose/1.5 m (4.92 ft.) ... 1
Hose coupling band ................. 5
Metal fitting for absorption pipe ... 1
l
Replacement Parts
Part No.
Part Name/Specification
B1276 Filter cap
A1074 Pre-filter/5 pcs.
B1278 Filter case
B1292 Nylon strap/2 pcs.
B1279 Duct/1.5 m (4.92 ft.)
B1293 Duct/3 m (9.84 ft.)
B1277 End cover
B1280 Absorption pipe A/6.5 x 100 , DASH, 900M/L, MACH-I
B1281 Absorption pipe B/6.5 x 130 , 455, 457, 458
B1282 Absorption pipe C/6.5 bent, MG30 W- 100 W
B1283 Absorption pipe D/6.5 x 140 , 456
B1596 Absorption pipe E/6.5 x 80 , 902, 904
B1953 Absorption pipe /6.4 bent, 907, 908
B1284 Metal fitting for absorption pipe A/
DASH, 900M/L, 457, 458, 902, 904
B1285 Metal fitting for absorption pipe B/MACH-I (920, 921, 922)
B1286 Metal fitting for absorption pipe C/MACH-I (918)
B1287 Metal fitting for absorption pipe D/MG 30 W – 100 W
B1288 Metal fitting for absorption pipe E/455
B1289 Metal fitting for absorption pipe F/456
B1291 Silicone hose/1 m (3.28 ft.)
B1314 Silicone hose/E.S.D., 1 m (3.28 ft.)
B2184 Silicone hose/1.5 mm (4.92 ft.)
B1290 Hose coupling band/5 pcs.
B1294 Exhaust duct/5 m (16.4 ft.)
A1069 Main filter/5 pcs.
B1239 Timing belt
B1245 Inlet socket
B1246 Pararell piping joint
C1026 Suppressor
B3246 Metal fitting for absorption pipe R
Maintenance
Be sure to regularly replace all
expendable parts and clean
the required areas. (Refer to
“6. MAINTENANCE, PARTS
REPLACEMENT” on Page 6.)
Unless specifically requested to
do otherwise, always turn off the
power switch and unplug the power
cord from the power source before
beginning any maintenance.
Tip Temperature
The tip temperature drops slightly
when the smoke absorber is in
use. In workplaces where strict
temperature control is required,
measure the tip temperature (using
our products (thermometer)) 10
minutes after operating the smoke.
Soldering Iron
A single HAKKO 494 unit can
handle up to 10 soldering irons.
Filter
Operating the smoke absorber
without inserting filter may cause
the turbo fan to malfunction.
Always run the system the filter in
place.
Duct
The duct should be a maximum
of 20 m (65.6 ft.) in length on the
suction side and 5 m (16.4 ft.) in
length on the exhaust side.
9
Pan head screw
with washer
(with spring washer)
M4 × 10, chromate (4)
Truss screw
M4 × 5, N (16)
Hexagon socket
set screw
M5 × 12 (2)
Hexagon socket head cap screw
M6 × 40 (4)
Plain washer
(12)
Spring washer
(4)
Nut
M6 (4)
Hexagon socket
head cap screw
M6 × 20 (3)
Spring washer
6 (3)
Hexagon socket
set screw
M4 × 6, Ni (2)
Pan head screw
with washer
(with spring, plain
washer)
M3 x 8, chromate (1)
Pan head screw with washer
(with spring washer)
M4 × 20, chromate (4)
Plain washer
(4)
21
22
11
17
13
12
10
24
23
26
27
20
19
20
16
15
18
17
25
Item No. Part No.
Part Name
Description
1
B1224 Connecting hose
2
B1223 Casing inlet
3
B1225 Connecting hose joint
4
B1228 Casing
with outlet gasket
5
B1230 Turbo fan
with hexagon socket set screw
6
B1222 Casing securing plate
with vibration proof rubber (B)
7
B1229 Follow unit
fan shaft, fan shaft fitting ball bearing x 2
