8 / 47
Hakki Pilke 50 Pro
Translation
Version 1-2018
The machine must be placed in the transport position if it is to be moved more than 5 metres. Exercise
extreme caution when moving the machine in the operating position. Always lower the machine to the
ground when you stop.
Note! Incorrect lifting may cause a hazardous situation or damage the machine.
2.3.
Main components of the machine
The Hakki Pilke 50 Pro is a firewood processor with fully hydraulic controls. In other words, all of the
machine's functions are controlled hydraulically with operating levers on the machine's control panel. The
guard of the cutting and splitting section is interlocked with the machine's operation: Opening the guard
stops the cutting and splitting functions.
Figure 2. Main components of the machine
A.
In-feed conveyor
B.
Control panel
C.
Cutting and splitting unit
D.
Out-feed conveyor
