Haiyang HIS-75A Manual Download Page 12

Page: 12 / 75

- 8 -

HIS-75A System

GETTING STARTED

This getting Started section will help you become acquainted with the displays and the front panel

keyboard functions of your HIS-75A System. This section is intended to demonstrate the main

functions and basic operation of your HIS-75A System. More detailed procedures may be found in the

Operation section.

HIS-75A has built-in simulators which present realistic displays of cartography, GPS and Sounder.

Note: Sounder option is required is required to use the sounder simulator. Simulators are interactive so

the front panel keyboard can be used to browse through menus and change setting in the same

manner as actual operation. The internal simulators allow HIS-75A to operate without having

transducers or remote sensors connected. However, it is necessary to connect the power cable to 12

to 24 Vdc power source. Please refer to

Power Connection

in the installation section.

If HIS-75A is already installed on your vessel, simulators are still useful doe familiarity with displays

and practice with operating procedures.

Summary of Contents for HIS-75A












































































Search results

Summary of Contents for HIS-75A

Reviews:

Brands by name

Popular brands

Haiyang HIS-75A, Manual

Search results

Summary of Contents for HIS-75A

Reviews:

Brands by name

Popular brands