Quick Instruction
14 of 15
Tel.:+82 32 327 4712 www.haiyang.co.kr
1.10.
What to do if not working properly?
Po
s Problem
Reason
Solution
1 "ON" LED not lit Board power
Please check the board
power connection
2 Not either
Channel A or
Channel B LED
flickering
No signals around
Are you in an area with
enough AIS traffic?
3
Antenna connection bad
Check your connectors
and your antenna cable.
Please be very carefully
with the soldering of
sockets and plugs. Bad
work will cause a loss of
sensitivity.
4 No AIS Targets
on the screen
Not well connected to
the PC or the
chartplotter
This can be checked
with a PC and the
"Hyperterminal
software" of Windows.
You find the
Hyperterminal SW
under
/Programms/Accesories/
Communication/.
Connect the easyAIS by
means of the cable and
the SUB D9 plug, which
is also enclosed to the
serial port of the PC.