Haivision Mantaray, Administrator'S Manual

Page: 25 / 60

Initial Setup
Joining Mantaray to a Furnace
Mantaray Administrator’s Guide, v1.0.3, Issue 01 25
IMPORTANT
By default the Mantaray’s date and time is 1 Jan 1970. The correct date
and time must be set before the Electronic Program Guide (EPG) will work.
5.
If your network supports DHCP, you can skip to Step #7 . (DHCP is enabled by
default.)
6.
To specify the IP address or other network settings for the STB, press the Up Arrow
on the remote control to scroll up to
Ethernet
.
Select Static, fill in the required addresses, and click
Save
. For details, see “Ethernet
Settings” on page 29.
7.
Use the remote control to scroll down to
Server Setup
.
Enter the IP of the Furnace and the corresponding port number. Click
Save
. For details,
see “Server Setup” on page 30.
8.
Wait until the STB application downloads and installs all necessary files from the
Furnace server. If there is a new software version, it will reboot. This may take a
minute.
When the STB display opens again, it tunes to the first channel and begins playing
audio and video.
9.
To display the Electronic Programming Guide, press the
EPG
button on the remote
control. The content displayed is based on the Furnace lineup.
TIP Administrators can use the
Furnace
Admin Web Portal (
Mantaray
Manager) to
manage
Mantaray
s, either individually or in groups.
For example, you can edit device information, remove devices, and send control
commands such as mute/unmute, reboot, set PIN/channel/volume, and power On/Off.
For more information, see the
Furnace
Administration Guide.