CLI Command Reference
Command Summary and Usage Information
Makito User’s Guide, v2.1.0, Issue 01
178
Operation Commands
Table A-1
Operation Commands
Command
Description
Use to manage video encoding parameters, including starting
and stopping encoding of the video input.
Use to manage encoder audio acquisition settings, including
starting and stopping encoding of the audio input.
Use to create and manage audio/video streams.
Use to manage metadata sources to capture metadata (either
KLV or CoT) and then incorporate data information within the
MPEG Transport Stream.
Use to manage logo overlays (i.e., a graphic file to display as a
logo overlay in the encoded video).
Use to convert a graphic file to Haivision’s overlay image format
(
.oly
) in order to display the image as a logo overlay.
Use to convert a static picture into a file containing an encoded
single H.264 GOP sequence. This is required in order to
configure a Makito stream with a static image that will replace
the “real” video stream when streaming is paused.
Use to display the list of the available video Profiles, as well as
the parameter settings for a specified Profile.
Use to take and manage snapshots from the video input.
Use to manage still image files on the Makito file system. Static
images are used to replace the “real” video stream when
streaming is paused.
Use to manage audio talkback settings to allow two-way audio
communication using the encoder’s Audio Output.
Use to view the current date.
Use to display the current temperature of the unit.
