manualshive.com logo in svg

Haivision Makito, User Manual

Share
Download
Haivision Makito User Manual Download Page 234

CLI Command Reference 

snapshot

Makito User’s Guide, v2.1.0, Issue 01

234

snapshot

NOTE  

Snapshot Capture is an optional feature which may be disabled at the factory. The 

following section is only applicable if snapshots are enabled. See 

“Disabling Snapshots”

 

on page

 

236.

S

YNOPSIS

snapshot take [format=value] [<filename>] [quality=value]
snapshot set [format=value] [quality=value] [maxsize=value]
snapshot get
snapshot list
snapshot delete [<filename>, all]

D

ESCRIPTION

The 

snapshot

 command is used to take and manage snapshots from your video input. You 

can save the snapshots in either .jpg or .yuv format, and for .jpg you can also specify the 
image quality.

When taking a snapshot of the current video input, the file name is optional. If none is spec-
ified, a unique name will be generated based on the current time if NTP is enabled, or a 
simple index such as 

snap-1.jpg

 if NTP is not enabled.

You can specify different formats and quality per snapshot in the 

snapshot take

 

command. You can also set system-wide defaults for the preferred snapshot format and 
quality via the 

snapshot set

 command.

A

CTIONS 

take

Takes a snapshot from the current active video. You can optionally 
specify the format and image quality per snapshot, as well as the 
filename.

set

Sets system-wide defaults for the preferred snapshot format and 
quality.

get

Displays the current format and quality defaults for the snapshot 
utility.

Summary of Contents for Makito







































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands