7
KORAT-70 / KORAT-76
KORAT-70/KORAT-76
insTALLATiOn
where to place the switch
The enclosure of the KORAT switch is designed for standalone or rack-mount
configuration. The switch is natively rack-mountable in a standard 1U (19”)
server rack. Rack-mount hardware is included with your switch for a sturdy
rack installation.
Cautions and warnings
Avoid placing cables near machines that create electrical noise such as
fluorescent lighting, air conditioning equipment, etc.
important information
Before you begin, make sure that power to all the computers you will
be connecting has been powered off.
To prevent damage to your installation due to ground potential
difference, make sure that all computers on the installation are properly
grounded. Failure to follow these instructions can result in damage to
computers and / or the switch.
installing the switch into a server Rack
The KORAT series includes 2 adjustable sliding rack mount brackets for
installation in 19-inch rack systems. The sliding brackets feature adjustable
positions for rack depths of 22-36 inches.
important information
installing and or removing the switch (module and chassis)
improperly could void your warranty. if you are uncertain what to do
please contact our technical support.
Rear View
(KORAT-1701)
1. Dc power input
2. console vgA port
3. console ps/2 Keyboard port
4. console ps/2 Mouse port
Rear View
(KORAT-1716)
1. Dc power input
2. pc ports (RJ-45 connectors)
3. Firmware Upgrade port
4. Daisy-chain
2
3
4
1
1
2
3
4