KORAT-70 / KORAT-76
KORAT-70/KORAT-76
BAnK identification
Daisy-chained switches are referred to as slaves or BAnKs and assigned
a location iD. For example, the console keyboard, monitor and mouse that
connect to the Master switch has a BAnK iD of “
”. The decimal point
denotes the Master switch.
if, for example, a user selects BAnK 2 as the new Master switch then the
BAnK iD displays
.
(
note:
a BAnK iD succeeded by a decimal point denotes Master switch status.)
HOT KeYs
port identification
each computer in an Black cAT5 installation has a unique port iD. you can
directly switch the KvM focus to any computer by entering the switch port
number and the BAnK number (for daisy-chained installations). each is
assigned a two digit numeric iD.
invoking Hot Key Mode
All Hot key operations begin with invoking the Hot Key mode. simply invoke
the Hot Key mode by pressing;
[sCROLL LOCK], [sCROLL LOCK]
within
two seconds.
single switch installation
n
The BAnK number (y) is the first two digit number that identifies the
switch’s position. in a single switch installation the BAnK number is always
“00”
.
n
The port number (X) is a two the two digit number (preceded by the BAnK
number) that identifies the port on the Black cAT5 switch that the computer
is connected to.
For example, a computer connected to
Port 8
has the numeric iD of 0008.
(note: the BAnK number always precedes the port number.)
Daisy-chained installation
n
The BANK number (Y) is the first two-digit number that identifies the
switch’s position in a daisy-chained installation.
n
The Port number (X) is a two-digit number that identifies the port on the
KvM switch that the computer is connected to.
For example, a computer connected to ‘
Port 8
’ of ‘
BANK 6
’ has the numeric
iD of
0608
. (note: the BAnK number always precedes the port number.)
note:
The above working diagram represents a KORAT-1716 daisy-chained with a single.
selecting the Active port
Directly switch the KvM focus to any computer by entering the BAnK number
and the port number:
For example, to access the computer connected to Master, port 8,
press:
[SCROLL LOCK],[SCROLL LOCK] , “0008”
For example, to access the computer connected to Bank 1, port 4,
press:
[SCROLL LOCK], [SCROLL LOCK] , “0104”
BAnK 00
(MAsTeR)
BAnK 01
(sLAVe)