11
OPTION 2:
Charging your HairMax by
placing the power cord directly into
the HairMax and the other end into an
electrical wall outlet. The indicator light
on the power button will flash during
the charging process. Once charging
is complete, the light will stop flashing.
During use, the indicator light will
indicate the battery level. A steady,
non-flashing light indicates the battery
is full.
When the battery is fully charged, the
indicator light will be on. As the battery
power diminishes, the light will blink
slowly. When the battery is getting low
and needs to be recharged, the light will
start to flash rapidly. When this happens,
charge your HairMax with one of the
charging options as described on page 10 and 11.
Proper Use
The LaserComb Prima 9 should be used for 11 minutes.
Use a watch or clock to time your treatment.
First, press the power button and hold until power
button light turns on.
Second, press the laser button.
The LaserComb is ready for use.
Shine the LaserComb onto the palm
of your hand and you will see that the laser light
is on (do not look at the laser light directly).
Do not use your HairMax if the device is damaged
or defective, contact HairMax customer service or your
place of purchase.
GETTING ST
AR
TED | PROPER
USE
GETTING STARTED | PROPER USE
PO
WER BUTT
ON
LA
SER BUTT
ON
PO
WER BUTT
ON
LA
SER BUTT
ON
If your device needs to be recharged during your treatment, simply insert the power cord directly into the end of the device and
the other end into an electrical wall outlet and conti nue with your treatment. When finished, allow the device to fully charge.
PO
WER BUTT
ON
LA
SER BUTT
ON
PO
WER BUTT
ON
LA
SER BUTT
ON
