MANOK plus
Commissioning
Order h49 7144.907-333
77
3. Use the actuating key to turn the actuating screw coun-
ter-clockwise up to its limit stop.
4. Remove the actuating key from the actuating screw and
remove it from the working area of the machine.
5. Remove the workpiece from the product. To do this, re-
move the workpiece mounting if one was used.
8.5 Procedure after a collision
In the event of a collision, the product and its components
must be checked for cracks and damage before being used
again.
For this, remove the product from the machine [see »Re-
moval of the product« chapter] and dismantle it [for level of
disassembly, see »Cleaning« chapter].
