HYDROK
Layout and function
Order h49 7144.907-333
33
4.3.5 Face driver adaptation
Adaptation of the face driver makes it possible to machine
the entire length of the workpiece.
4.3.6 Multiple clamping plate
The multiple clamping plate is used to install up to four hy-
draulic clamping devices in a linear or square configuration.
4.4 Special aids
4.4.1 Manual changing fixture
The pins on the changing fixture are installed in the chang-
ing bores in the clamping head. The changing fixture is ac-
tuated by manual force. Depending on size, the changing
fixture may be designed for single-handed or for two-
handed actuation. The clamping head is clamped firmly in
the changing fixture and can be installed in the mounted
clamping device with the help of the changing fixture.
4.4.2 Pneumatic changing fixture
The pins on the changing fixture are installed in the chang-
ing bores in the clamping head. The changing fixture is ac-
tuated pneumatically. Depending on size, the changing fix-
ture may be designed for single-handed or for two-handed
actuation. The clamping head is clamped firmly in the
changing fixture and can be installed in the mounted clamp-
ing device with the help of the changing fixture.
