HYDROK
Layout and function
Order h49 7144.907-333
31
4 Layout and function
4.1 Overview and brief description
1
Clamping head [clamping
element]
2
Coupling
3
Clamping device
The clamping device is screwed to the machine table.
The media guides are connected to the clamping device.
The clamping element was installed in the clamping device
with an appropriate changing fixture and it clamps the work-
piece being machined.
When clamping, the clamping element performs an axial
movement.
The mobile coupling draws the clamping element into the
stationary taper.
4.2 Accessories required
4.2.1 Clamping head
The clamping head is there to support the workpiece being
machined. It consists of hard steel and rubber segments con-
nected by vulcanization.
Depending on workpiece requirements, various sizes of
clamping head are available, also with different profiles and
bores.
4.3 Optional accessories
The following optional accessories are available for different
sizes of product.
