Quick change-over system centroteX S
Safety
14
Order h49 7144.907-333
NOTE
Damage to materials caused by incorrect use of
the product!
Only in a CE-compliant machine tool with a sepa-
rating set of guards.
Only use for the type of use indicated [see »Use«
chapter].
Only skilled staff from the appropriate specialist
fields may use the product [see »Personnel re-
quirements« chapter].
Never exceed the technical data indicated on the
product [see »General information« and »Operat-
ing conditions« chapters].
Never exceed the limits for use of the product [see
»Limits of use« chapter].
Maintain the product at regular intervals [see
»Maintenance schedule« chapter].
Only use with approved attachments.
Claims of all kinds will be rejected that are due to unintended
use.
Here are some examples of unintended use of the product
If people fail to observe the safety stipulations when
working on the product, by failing to use additional pro-
tective equipment.
if the product is used on machines, machine adapters or
clamping devices for which it is not intended.
2.4 Personal protective equipment
During work, it is essential to wear personal protective equip-
ment to minimize the health hazards.
Always wear the required personal protective equipment
when working on any given job.
Always pay attention to any notices about personal protec-
tive equipment displayed in the working area.
Always wear
When working, always wear the following items:
Workplace clothing
Workplace clothing should be close-fitting, with low tear-re-
sistance, narrow cuffs and no protruding parts. It serves pri-
marily to protect the wearer from coming into contact with
moving machine parts. Do not wear rings, chains or other
jewelry.
