Quick change-over system centroteX M
Use
Order h49 7144.907-333
47
INFORMATION
To simplify installation / removal of the quick change-
over unit on a horizontal spindle of the machine, Mon-
teq lifting tackle can be used [see operating instruc-
tions for the lifting tackle].
1. As described in the »Preparation of the machine for in-
stallation« chapter, prepare for the following steps.
NOTE
Damage to materials caused by a defective end-
stop on the machine adapter during installation /
removal of the quick change-over unit!
If the operating instructions for the quick change-
over unit specify a different end-stop for the ma-
chine adapter than the one described below, com-
pliance is mandatory.
2. Move the machine adapter to its front end-stop.
3. Attach any lifting gear that may be required.
4. If necessary, fit the mounting aid onto a vertically sus-
pended spindle.
5. Clean the flat surface of the machine adapter and quick
change-over unit with a lint-free cloth.
6. Fit the quick change-over unit to the machine adapter so
that the mark on the quick change-over unit is aligned
with the »OPEN« mark on the machine adapter.
