Quick change-over system centroteX M
Layout and function
24
Order h49 7144.907-333
4 Layout and function
4.1 Overview and brief description
1
Machine adapter
2
Bayonet drawtube
adapter
3
Quick-release screws
4
Bayonet coupling
5
Quick change-over
adapter
6
Clamping device
The quick change-over system is used for fast conversion of
the machine tool to different clamping devices / supports.
For this, there is one support that always remains on the ma-
chine spindle, the machine adapter.
The clamping device is equipped with an appropriate coun-
ter-support, the quick change-over adapter.
Together, the clamping device and the quick change-over
adapter form the quick change-over unit.
The machine adapter is secured to the machine spindle.
The bayonet drawtube adapter on the machine adapter is
screwed to the machine drawtube.
The quick change-over unit is secured to the machine
adapter by means of axial quick-release screws.
The actuation mechanism of the power-actuated clamping
device is connected to the machine adapter by the bayonet
coupling on the quick change-over adapter.
