Hailo ProfiLine T350, Use And Operating Instructions

Page: 22 / 88

22
6. Assembly / operation
6.2 Extending and setting up the ladder
1. Then extend the telescopic ladder.
Grasp the rails with both hands at the black retaining
rings [C] of the 3rd rung [B] (the rung of the lowest
extendable section of the ladder) until the whole section
is completely extended and the ladder rung is completely
engaged.
Repeat this work step (the next extendable rung is the
4th rung from the bottom).
2.
In order to climb a ladder rung, the rung must be
securely locked.
The release buttons [F] on the 2nd rung must be automa-
tically securely locked.
After extending the ladder, the red marking [F-1] must
no longer be seen.
The two locking displays [G] are on the lower side of all
the additional rungs.
• Latching button [G-1] protrudes completely
from the opening = ladder rung is locked.
• Latching button [G-1] is in the ladder rung =
ladder rung is unlocked.
3. Repeat this work step to extend the telescopic ladder (the
next extendable rung is the 5th rung from the bottom).
Then extend each additional ladder section (only one at
a time) until the desired ladder height is reached.
A block formation (group of unextended ladder rungs)
must only occur in the uppermost ladder section.
If necessary, the extended ladder should be kept
horizontal to extend the higher ladder sections.
1.
2.
3.