Hailo BFD-50/8-1 Information Booklet Download Page 5

5

•   Only persons who have been instructed in the 

use of vertical ladder and fall protection systems 
may use the H-8 fall protection system and the 
SSL-8-R1 fall arrester. The user of the fall arrest 
system must be physically and mentally capa-
ble of movement using the respective equipment. 
Safety in normal or emergency conditions must 
not be compromised.

•   The contractor or operator of a plant must put in 

place a plan which covers all possible emergen-
cies that might arise when using the fall arrest 
system and outlines the measures required for 
rescuing personnel.

•   The accident prevention regulations  

DGUV regulation 1 and  
DGUV rules 112-198/199 (Germany)  
must be respected. 
Testing must adhere to the respective national 
operating and testing regulations.

•   No changes or additions may be made to the H-8 

fall protection system without the prior written 
consent of Hailo. Repairs may only be carried out 
using original parts and in accordance with Hai-
lo‘s instructions.

•   The SSL-8-R1 fall arrester is designed for use in 

temperatures ranging from - 40°C to + 50°C. 
The safe function of the fall arrester can be im-
paired e.g. by extreme climatic conditions, chem-
icals, contamination or mechanical influences 
(sharp edges, oil, ice, etc.). Use in this case is 
prohibited.

•   No more than 3 persons may use the fall arrest 

system at the same time. The distance between 
individual users must be at least 6 m.

•   The H-8 fall arrest system is designed as a fall 

safety when using rung ladders and pole climb-
ers, both above ground and below ground.  
It is designed for a safe ascent and descent of 
service personnel to workstations at higher or 
lower levels.

•   The SSL-8-R1 fall arrester is approved exclusive-

ly for securing persons with a total weight (body 
weight of the user including clothing and equip-
ment) of 50 - 136 kg.  
The use of climbing aids is prohibited unless the 
safe usability of the combination in question has 
been explicitly demonstrated. 

•   Users of the H-8 fall arrest system, along with 

their fall safety personal protective equipment 
(PPEgA), connect to the fall arrester, which runs 
along the entire length of the ladder system.  
(see page 6). 

•   The fall protection system may only be used 

within the operating conditions described in this 
information booklet.  
Any other use (e.g. as workplace positioning or 
as an anchor point) is prohibited and can lead to 
failure of the safety system in the event of a fall.  
No liability is assumed for personal injury or 
property damage resulting from violations of the 
provisions outlined in this booklet or from failure 
to comply with the safety instructions.

 

3.  Intended use 

 

4.  Safety instructions

Summary of Contents for BFD-50/8-1





















Reviews: