9
CAUTION!
CAUTION!
Overview SPL-50-PRO fall arrester
• The SPL-50-PRO fall arrester [A] is attached
to the H-50 fall arrest rail before climbing/de-
scending. The SPL-50-PRO fall arrester when
attached to the rails is fitted with a BFD-50-
136 shock absorber [B] and is connected to the
user’s safety harness.
• The fixed and integral BFD-50-136 shock absor-
ber (DIN EN 353-1:2018) must be replaced on re-
aching its expiry date. The shock absorber may
only be replaced by the manufacturer.
• The SPL-50-PRO fall arrester is designed such
that it is not possible to thread the device incor-
rectly onto the fall arrest rail.
The fall arrester cannot be opened or closed in
the wrong pulling direction.
It is also not possible to insert the fall arrester in
the wrong direction of pull from above or below
on the fall arrest rail.
[C]
6. Use of the SPL-50-PRO fall arrester
Danger of pinching!
In case of careless handling, fingers or skin can
get squeezed between the housing parts [A].
The SPL-50-PRO fall arrester may only be
used in the correct direction of pull (red arrow
pointing upwards).
The housing of the fall arrester contains
magnets which can influence the function of
pacemakers!
