HaiLin Controls Lake Extra, Manual

Page: 13 / 78

11
Installing Wall plate
CAUTION
Electrical hazard can cause electrical shock or equipment damage.
Disconnect power before wiring.
The thermostat can be mounted horizontally on the wall.
1. Position and level the wall plate (for appearance only).
2. Use a pencil to mark the mounting holes.
3. Remove the wall plate from the wall and if drywall, drill two holes in the wall as marked.
For firmer material such as plaster, drill two holes. Gently tap anchors (provided) into the
drilled holes until flush with the wall.
4. Position the wall plate over the holes, pulling wires through the wiring opening. See
Fig.5.
5. Insert the mounting screws into the holes and tighten.