HaiLin Controls
Beijing HaiLin Auto Controls Equipment Co., Ltd. Page 3 of 3
Shahe Industrial Zone, Changping District
Installation
Thermostat Location
Thermostat should be mounted:
• Approximately 5 ft (1.5 m) from floor.
• Close to or in a frequently used room, preferably on an inside
partitioning wall.
• On a section of wall without pipes or duct work.
1.
Cut off the power, the mark of wire should be clear.
2. Take the main control panel
apart: put the screwdriver
(3.5mm wide) into 4mm of slot.
3. Push up by force, open the clip.
4. Fix by the two screws in the
packing box.
5. As per wiring drawing, connect
with terminals, fix it by
screwdriver.
6. Push the downside by force,
lock the up panel, and finish
the installation.
