SPECIFICATIONS
Input:
240V AC
50Hz
15W
Output Voltage:
Nominal: 6V and 12V
Charging Voltage:
3.75V:!: 0.25V (6V battery) or 7.5V:!: 0.25V (12V battery)
Input Current:
130mA R M S max
Charging Current:
6V/12V DC= 0.75A:!: 10%
Cut Off Voltage:
7.2V:!: 0.25V (&V battery) or 14.4V:!: 0.25V (12V battery)
Temperatures:
Storage Temperature:
-20•c
to
so•c
Operation Temperature:
o•c
to
40•c
Type of Charger:
Three step, fully automatic with maintenance charging
Type of Batteries:
6V/12V Lead-Acid Batteries (WET, MF, AGM and GEL)
Baltery Capacity:
1.2-20Ah\200-250CCAI
FAULT FINDING
1. PROBLEM:
The plug of the battery charger is inserted into 240V AC mains
power supply, battery clamps or terminals have been
connected to the battery but no charging occurs.
POSSIBLE FAULT: Double check that both battery clamps or terminals are making
good contact with the respective terminals.
Battery is not &V or 12V lead-acid type.
Battery is below 3.75V (for &V battery) or 7.5V (for 12V battery).
2. PROBLEM:
No spark when charging clamps or terminals touch together.
ANSWER:
The charger features an inbuilt safety device to prevent
sparking if clamps or terminals accidentally touch.
3. PROBLEM:
Multi meter will not provide a reading between charging
clamps prior to connection to battery.
ANSWER:
The charger will only operate when connected to a &V battery
with more than 3.75V or to a 12V battery with more than 7.5V. A
multimeter voltage reading will only be provided when the
charger is connected to the battery.
