Haifuan S100BMF, User Manual

Page: 8 / 10

7
3.6. Add Code and Card Combination User
Operating steps Locks status
1 Input the “
Master Code
” then “
#
”
You will hear two beeps.
2 Input “
01
” then “
#
” within 10 seconds(before the
indicator light extinguishes )
You will hear two beeps.
3 Input
“group number”
such as
“003” within 10
seconds(before the indicator light extinguish ) then
“
#
” (Group number can only be used once, if you
already use 003, then input 004 or others that is
still valid)
You will hear two beeps.
4 Input “ Code
” within 10 seconds before indicator
light extinguishes
then “
#
”
You will hear two beeps.
5 Put the “
Card
” close to the inductive place within
10 seconds before indicator light extinguishes, then
“
#
”
You will hear two beeps.
6 Press “
#
” 2 times.
Fir
st “#” “beep” twice, Second ”#” “beep” 3
times, card and code combination user added
successful.
7
After 15 seconds, or press”#”, Exit “beep” twice, red light flashes twice, back to
locked status, and the indicator light
Note: You must set the code first, and then the card.
Under this Mode, You need to use the
Card together with the Code to open the door.
Open door operation :
Operating steps Locks status
1 Get the “
Card
”
close to the
inductive place.
You will hear two beeps, front light flash blue, and keypad illuminate.
2 Input the “
Code
” then “
#
””
You will hear one beep, and indicator light keeps in blue, you can
also hear the sound of lock motor started, turn the handle to open
the door.
3 After 5 seconds
“beep” twice, red light flashes twice, back to locked status, and the
indicator light extinguishes.
4. Normal User Block, Re-start, and Delete
4.1. Normal User Block
： （
02#
）
Operating steps Locks status
1 Input the “ Master Code
” then “
#
”
You will hear two beeps.
2 Input “ 02
” within 10 seconds(before the indicator
light extinguishes )
then “
#
”
You will hear two beeps.
3 Input “
Group No.
” within 10 seconds(before the
indicator light extinguish )
then “
#
”(Group No. which
you want to block), you can also input another
group no. and then press # if you want to block it at
the same time.
You will hear two beeps. Block up successful.