39
EN
Short press the
"Wi-Fi"
button. The
display will show
"CONNECTING..."
followed by
"REMOTE CONTROL ON"
.
Close the door.
You can now control the dishwasher from
the App.
To exit remote control, press the
"Wi-Fi"
button on the appliance again.
The
"Wi-Fi"
indicator will blink very
slowly.
With cycle not in progress:
- The message
"REMOTE CONTROL
OFF"
appears on the product display. It
will be possible to manually select a
new cycle.
With cycle in progress:
- The message
"REMOTE CONTROL
OFF"
appears on the product display.
The display will then show the
remaining time. The cycle will be
completed without having control from
the App.
An alternative way to exit remote
control.
Press the "START/RESET" button
for 3 secs.
If there is a running cycle, it will be
cancelled, and the machine will exit
REMOTE CONTROL
mode.
The
"Wi-Fi"
indicator light will blink
slowly. It is now possible to set a new
wash cycle from the control panel.
Press the "ON/OFF"
button for 3
secs (or power off).
If there is a cycle in progress, it will be
paused and the appliance will exit
REMOTE CONTROL
mode.
When switching it on again, the
"Wi-Fi"
indicator light will blink slowly and any
cycle in progress will continue from the
point of interruption.
Indicates the connection status of the
product to the home
Wi-Fi
network. It can
be:
-
FIXED ON:
remote control enabled.
-
VERY SLOW BLINKING:
remote control
disabled.
-
SLOW BLINKING:
reset of the
Wi-Fi
network (during pairing on the App).
-
FAST BLINKING:
appliance associated
with the App but no
Wi-Fi
connection.
Check the correct functioning of the router
or the changed home
Wi-Fi
credentials
(Network name and / or password). In this
case, update the settings within the App,
following the instructions on the
smartphone.
Wi-Fi connection indicator light
Opening the door, any REMOTE
CONTROL will be disabled. To resume
control from the App, close the door.
DISABLING REMOTE CONTROL
For built-in models, do this before
turning the appliance on.
